Telung kritéria kanggo milih minyak hidrolik kanggo mesin cetak injeksi!

Mesin cetakan injeksiyaiku proses pangolahan plastik, pamrosesan polimer bakal akeh energi, lan akeh konsumsi energi uga bakal digawe ing piranti adhem, kompresi udara lan tautan liyane. Mesin cithakan injeksi konsumsi energi sing gedhe kanthi alami bakal mbutuhake minyak hidrolik. Wis ngasilake standar sing dhuwur banget, mula kepiye milih minyak hidrolik mesin cetak injeksi? Ana telung standar utama kanggo referensi!

Salah sawijining kriteria kanggo milih minyak hidrolik kanggomesin cetakan injeksi: pilih minyak hidrolik kanthi viskositas lan suhu sing cocog. Persyaratan viskositas minyak hidrolik nalika digunakake  temperature and starting temperature of the mesin cetakan injeksi are related to the fluidity of the hydraulic action of the mesin cetakan injeksi and the accuracy of the transmission, which directly affects the working efficiency of the mesin cetakan injeksi. Therefore, the hydraulic oil selection of the mesin cetakan injeksi should consider the viscosity and stability. Whether the performance meets the requirements of the production work, if it does not meet the requirements, it should be replaced in time. At the same time, according to different external environmental temperatures, it is also necessary to appropriately select the appropriate hydraulic oil.

Kriteria nomer loro kanggo milih minyak hidrolik kanggomesin cetakan injeksi: anti-wear hydraulic oil. Generally, under high-pressure work, it will increase the friction during work. Therefore, anti-wear hydraulic oil is a hard requirement. It can not only reduce friction on mesin cetakan injeksis. The damage can also improve work efficiency. At the same time, this hydraulic oil also has anti-rust and anti-oxidation effects. The anti-wear hydraulic oil that is given priority for mesin cetakan injeksis is generally No. 46 or No. 68.

Kriteria kaping telu kanggo milih minyak hidrolik kanggomesin cetakan injeksi: the shear stability of the hydraulic oil. In the production process, the hydraulic oil will be severely sheared when passing through the micro-holes of the pump and valve. At this time, the performance and effect of the hydraulic oil will be damaged. Therefore, when the hydraulic oil is selected, the resistance to the hydraulic oil is Shearing capacity must have a high-demand selection standard, which has a good protective effect on maintaining the functionality of the mesin cetakan injeksi.

There are standards for selecting hydraulic oil, and there must be standards during the use of hydraulic oil. Some hydraulic oils have a reduced efficiency after being used for a period of time, so they must be replaced in time. The blackening of the hydraulic oil or the presence of some impurities in the hydraulic oil is to remind us that there has been a problem with the hydraulic oil. We must pay attention to timely supplement and replacement of the hydraulic oil. This is not only for the maintenance of the mesin cetakan injeksi, but also saves time and electricity. , An effective guarantee for work.